Vision Spinner 2 Starter Kit With Kanger Clearomizer and FREE E Juice
The new Vision Spinner is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look, equipped with a matching Kanger Clearomizer.
If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try. Its the perfect 510 battery now with an extended battery life and comes in the color of your choice.
The Vision Spinner 2 also comes fully equipped with its own convenient built in battery meter charge indicator. When fully charged the button illuminates white, at half charge the color changes to blue and below a 30% charge it turns orange indicating low battery and a recharge is soon required.
•Spin Dial for adjusting Voltage
•Upgraded PBC and battery cell increasing lifespan
•Operating Voltage: (Output 3.3-4.8V)
•Charging Voltage: (Input 4.2V / 420mA)
•Kanger T3s Bottom Coil Clearomizer
•Ego USB Charger
•Free bottle of E Juice
The Vision Spinner 2 Variable Voltage battery has four distinct safety features:
- Short Circuit Protection: In case of a short circuit, the battery will automatically shut down. It will turn on again once the current is back to normal.
- Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again.
- Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
- Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power. The LED light will flash 5 times to remind you to charge your battery.
- The Vision Spinner also has a 5-click on/off safety feature that prevents accidental activation when your ecig is stored in your pocket or purse.
- Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster. It is highly recommended that you start at 3.3 volts and increase the settings gradually until the vapor hits your sweet spot.